Cabinet movement is locked to a set value
In the plan view you can move a cabinet freely with the mouse by dragging it around, but there can be a time when the drag function will be locked to a set value, and you cannot move it freely.
Solution
There is a quick lengths movement tool. You will find that your movement will be stuck with one of the values in your movement tool settings.
To free this, hold down the number pad value that is stuck, eg if you cabinet is stuck only allowing 500mm movements, then hold the 5 key on the number pad, then also press the 'Num Lock' key.
Related Articles
Customising a cabinet in CabMaster Software
Customise a Cabinet Cabinets can be customised before or after they are placed on the drawing. For comprehensive discussions see also the following: CabMasterPro Help topics [F1] : Topic Discusses Cabinet Properties Different ways to select cabinets ...Universal Cabinets missing the hinge plates on the Ends
When using the Universal cabinets, we can sometimes see the hinge plate holes on the End Left and End Right go missing. There is two options that can create this result, but they are both connected to the Donor Acceptor mechanic which occurs when two ...Corner Cabinets
Corner Cabinets The following will discuss overlapping corner backs, extending kickboard and backs, and grain direction of shelves. Shelves - Grain Direction The ‘Reverse Grain’ option on the ‘Shelves’ page of the ‘Labour & Construction’ category ...Inset Drawers and Doors
Inset Drawers & Doors The process of creating inset drawers and doors are the same across all Universal cabinets, so we will be using a Tall Universal in this HowTo document. Inset Doors This is by far the easier option. As the Tall Universal cabinet ...Elevation view is not showing all the cabinets
Elevation View Distance Elevations have the option to reveal cabinets based their distance from the elevation line. This document will cover what an elevation line is and how to change its view distance. Elevation Line When creating a wall, an ...