Add Render to Clipboard
I think a great addition would be once a render is completed having a button to add the rendered image to the clipboard, Then the user can instantly paste the render onto a page on the drawing. At present we need to navigate to the render, Open and then
I need help
My Cabmaster 11.1 setup has been lost I want to download it can anyone help me I need version 11.1 If anyone have share me link on WhatsApp please help My whatsapp+91 8360405161
Elevation Dimset
I think we're pretty overdue for a Dimset tool for Elevations just like we have for Floorplans with editable settings. I think everyone would be spending a considerable amount of time doing manual dimensioning all the time. Its a nightmare to keep track
Sinks and Cooktops to cutout benchtops
Hi there, I really like the new doors and windows that automatically cutout the wall when they are placed against it, and i think it would be awesome if the same could be done with sinks and cooktops that we can drag onto a benchtop and it would cut the
V12.0.0.78 Render Location
Hi All, A few of our users have updated to version 12.0.0.78 in previous versions the photo view output location would default to the file the job is saved in. In this current version it is not doing this meaning we are manually having to direct the renders
Add Ability to edit/add a point to a dimension line Later
Hi there, I think it would be very useful if you were able to edit or add points on a dimension line after it has been placed, As currently if we need to do this we need to delete and add a totally new dimension line
3D Models displaying in different orientations for different users
Hi All, I have built some 3d models of sinks and some other items to make our 3ds more accurate, Strangely these models function and display correctly for myself and some users while for others they are rolled 90 degrees. Has anyone experienced this and
Drawer spacer adjustment
We make a lot of wardrobe cupboard with internal drawers (behind doors). Using drawer spacers in the past, the drawer runners hang below the spacers - which doesn't look great. When using drawer spacers, is there any way to adjust the position separately
Tilt panel on angle
Is there a way to Lay/Tilt the panel over at the top?
Sliding Doors on Cabinets
We are having trouble putting sliding doors on Cabinets for some office joinery. Any suggestions ??
V11.1 - v12 compatability
Before updating to v12, will version 11.1 drawings have full compatibility within version 12?
Mirror image for Dual Occ designs.
using Cabmaster and trying to find a away to flip a design giving me the mirror image to allow me to export both a left and right version for Dual Occupancy jobs. At this stage I'm drawing both sides as 2 separate jobs but would need a way to save time
COLLISION DETECTION FOR HINGES ON SINGLE DOOR SPLIT PANTRY OR FIXED SHELF
Is it possible for hinge positions to automatically move to a set position above the bottom of the top cabinet in a split pantry if it lands on, or too close to a hinge? ie: if a hinge is <50mm from the cabinet split, that hinge will automatically adjust
GRAIN MATCHING FOR WALL 2 DOOR LIFT/SPLIT PANTRY
There needs to be an option under materials for wall 2 door lift and split pantry cabinets to cut as full door and force full door when material is grained - same as there is for drawer cabinets. 100% of the time people want their bi-folding overhead
Wall/Floor tiling
Hi CabMaster Is there any help about wall/floor tiling? And I mean not just where the tile folder is I'm struggling to find the right way to do this properly Please help Thanks Sakis
island joinery elevation
how do I create an elevation of units that are in an island and not attached to a wall?
How to Auto Dimension Elevations ?
Hollaaa Everyone, I know its really easy and handy to use Auto Dimension the Plan View, Does anyone know how to use Auto Dimension On the Elevations ???
reflective mirror 3d model
Does anyone have a 3d model of a mirror that will show a reflection in a 3d render they can send me? I have tried to make my own in Blender but cannot figure it out properly.
print current page
is there a way to set print current page to be the default setting, rather than accidentally printing all 13 pages?
Need help with opening a Cab master file
File keeps coming up with a note 'unexpected file format' and then shutting down the file so I cant open it at all.
Shelf/Mullion Cutouts - Both?
Currently for the cutouts where a mullion and shelf overlap there's only the option to have either the mullion or the shelf. Could we get an option to cutout both? Something similar to the wine racks where it cuts out half the overlap from each part would
The logo is not printing properly
The logo used to be shown at bottom left corner on each page. But the logo image becomes totally black paint when I print the job plan sheet today. Does anyone know how to fix this simple error? Thanks for your help.
Reverting to a Cabinet to use Drawing Properties?
Is there a way to get a cupboard to go back to using the job defaults instead of a constant value (I'm after cupboard height and depth in particular)? At the moment if you change these on an individual cupboard, there isn't a way to revert them back to
Elevation Dimension Oversize?
When using the 'Show Dimensions' with elevations, the font its using is way oversized (see attached image). It used to work just fine for me, have I changed a setting or something? I've had a bit of a look, but haven't been able to find anything that's made a difference.
Kick Face Edging
Can we get an edging option for kick faces? Can't understand why this is not an option.
Making the top drawer in a tall universal into two
Drawing a wardrobe fit out using a tall universal cabinet, mking the bottom section into a bank of 3 drawers and need the top drawer to be split into two equal drawers, is this possible and what would the process be?
Wall End Panel Heights
Can I set up Wall End Panels in the library so that their height off the bench is always a fixed distance lower than that of the door cupboards? We have the doors stick past the carcass bottom 18mm in order to cover the bottom panel of the overhead, so I always need to adjust the height of the end panels to line up. Is it possible at all to use a formula in the Library like HeightOffBench - 18 for the panels, or is there another solution? Just trying to streamline my workflow as much as possible
Colour Selection
Would much rather a colour selection panel as: *Colour A *Colour B *Colour C instead of the current: *Floor *Wall *Tall Most multiple coloured kitchens are not based on floor, wall and tall but rather sections or sides. Current set up makes changing colours incredibly time consuming.
Reflective mirror splashbacks
Is there a mirror splashback in the library that will be reflective in a 3d render (like the picture attached)? If not can you change the properties of a material to be reflective?
Glass Shelves
Is there a way to make transparent glass shelves?
Hinge hole drilling
When drilling hinge holes in doors , would be good if the holes would move to suit nominated door gaps. It only works when entering a minus size. It works for drawer front lugs with no issues but not for hinge holes. Would be great to look at this .
Updates Available
Hello CabMasters, We have updates available for both the application and library. This addresses some of the issues posted here as well as numerous others. To get updated, please call our Support Team on 03 9040 2000.
Cabinets Backs
Is it possible to spit backs into two pieces There has been situations I've had to remove the backs and drop in two panels because of the size The past situations was an on bench cabinet that was 1800mm square and an entertainment unit 3000mm long And this would be good for tall cabinets too
Door Gaps
having a door gap automatically adjust when next to a panel would be super dooper
Welcome to CabMaster Softwares Support Portal
CabMaster Software are always looking at ways to improve our Customer interaction to assign you, the customers to get a more streamlined time with CabMaster Software. We are now introducing a Community Forum where all our customers can openly discuss topics, issues and all work related items. We have also introduced an online support ticket submission area where you can not only submit a ticket for an issue or request but you can also view all your open and closed cases. Also included is this community